고품질 파이프 캡을 얻는 방법은 무엇입니까?

What is a pipe cap?

Pipe cap acts as protective device and are designed to protect pipe ends of various shapes. The main purpose of using pipe caps is to waterproof the connections. They are also used to close the the ends of hydraulic or pneumatic pipes and tubes. They are used in the plumbing apparatus of domestic, commercial and industrial water supply lines, machinery and processing equipment etc. They are also fitted on water pump lines with the sole purpose of removing air blocks. Pipe caps are highly demanded as an important category of pipe fittings. If a solvent-weld cap is used to provide for a future connection point, several inches of pipe must be left before the cap; when the cap is cut off for the future connection, enough pipe must remain to allow a new fitting to be glued onto it.

How to connect pipeline with pipe cap?

Pipe Cap is directly welded to die at the end of the pipeline; at the end of the pipeline can also welding flange, then with a blind flange to death, when necessary can open the blind flange, pipeline check inside.
The conventional cap holder with pressure pressing made by thick wall; forging; by spinning large diameter.
The need for maintenance or even after the connecting line, with blind, not later, with a pipe cap. With the blind plate has the possibility of leakage, there is a long time, and screw rust died, as useless, the heat pipe is not very easy to heat insulation.

표면 처리:

• Transparent oil, rust-proof black oil or hot galvanized.
• Special design available All the production process are made according to ISO9001:2000 strictly.
• Based on different materials, pipe caps include carbon steel cap, stainless steel cap, and alloy steel cap etc.
• Depending on their construction, pipe caps contain threaded cap, tapered cap and anti-roll cap etc.

일반적인 파이프 캡 모양:
Pipe caps are available in various shapes. Having an intense knowledge about the shape of pipe cap would be beneficial for the buyer. Some of the common shapes of pipe caps are: 

• 라운드
• Square
• Rectangular
• “U” Shape Cap
• “I” Shape Cap
• Hex Cap etc.

파이프 캡의 특징:
구매자가 파이프 캡을 대량 구매하기 전에 고려해야 할 몇 가지 중요한 사양이 있습니다. 고려해야 할 중요한 사양은 다음과 같습니다: 

• NPT (National Pipe Thread ) size: 이 기능은 보호해야 하는 물체에 수나사가 있는 둥근 모양의 캡에 적용할 수 있습니다.
• BSP (British Standard Pipe) size: 이 크기 옵션은 캡을 씌울 물체에 수 BSP 나사산이 있는 둥근 모양의 캡에만 적용할 수 있습니다.
• Diameter: 직경은 원형 캡과 플러그에만 적용되는 중요한 치수입니다. 직선 나사산이있는 피팅의 경우 고려해야 할 가장 중요한 기능은 주요 나사산 직경입니다. 그러나 캡, 플러그 또는 캡을 씌울 물체에 테이퍼형(NPT 또는 BSP) 나사산이 있는 경우 이 치수는 중요한 고려사항이 아닙니다.
• Shape: The dimension and shape of pipe caps are also very important points to consider. Pipe caps of different shapes have different features. 

Some features are:

• A.Round Caps: Popular features of round caps are: flange, slotted head, knurled or faceted head, retaining head, and tear tab. A flange is meant for easy removal or additional protection of pipe or tube surfaces. Flanges also help to prevent accidental pushing away of the plug through the opening. Slotted caps can be easily installed or removed with the help of a screwdriver. Knurled or faceted heads are usually designed for threaded caps and plugs only. Knurls or facets offer hassle free installation and removal. Pipe caps provided with a tear-tab or strip are easy to remove.
• B.Square or Rectangular Cap: For square or rectangular caps, length and width are the most important dimensions to consider. For rectangular caps, the width is the smaller cross sectional dimension, whereas for square caps, the length and breadth are the same dimension.

Types of pipe caps:
파이프 캡은 다양한 유형으로 제공되며 용도에 따라 유형이 다릅니다. 그러나 파이프 캡도 구조적 특징에 따라 다르므로 구매자가 올바른 유형의 파이프 캡을 아는 것이 매우 중요합니다. 구조에 따라 파이프 캡은 다음과 같은 유형으로 나뉩니다:

Threaded Caps:
이 캡은 암나사산입니다. 나사산은 직선형 또는 테이퍼형(NPT라고도 함)일 수 있습니다. 일반적으로 캡에는 암나사가 있고 플러그에는 수나사가 있습니다.

테이퍼드 캡:
이 캡은 측면이 가늘어져 있어 밀착감이 좋습니다. 이러한 피팅 중 일부는 캡 또는 플러그로 사용할 수 있습니다. 테이퍼형 캡과 플러그는 다기능이며 수나사 및 암나사, 직선 튜브 및 바, 수나사와 잘 어울립니다. 이러한 피팅은 몸체가 테이퍼형으로 되어 있어 안전하고 견고한 마찰력을 제공하는 동시에 쉽게 제거할 수 있습니다. 테이퍼 캡은 모든 내부 및 외부, 나사산 및 비나사산 피팅을 손상, 먼지 또는 습기로부터 보호할 수 있도록 설계되었습니다.

롤 캡 방지:
이 캡은 둥근 모양에 끝이 약간 사각형입니다. 이렇게 하면 파이프와 튜브가 구르는 것을 방지할 수 있습니다.

Carbon steel end caps

Carbon steel caps are usually used for protecting the end of pipe and other fittings, so the shape is designed according to the shape of pipe line.

These Carbon steel caps are widely well-known for the utmost output and outstanding results that it gives.

Carbon steel caps manufactured using superior grade raw materials. Carbon steel caps are used for connecting pipes of different diameters and find wide applications in various chemicals, construction industries, paper, cement & ship builders.

Socket pipe cap

Socket welding pipe cap also known as high pressure pipe cap, forging steel pipe cap, nominal size: 1/4 “- 5”, DN20-DN200, applicable medium: water, steam, oil etc.

Socket Pipe cap is widely used in nuclear power, chemical, food, pharmaceutical and other industries, the head of pressure vessel is a mechanical element, element is under pressure.

Socket welding pipe cap also known as high pressure pipe cap, forging steel pipe cap, nominal size: 1/4 “- 5”, DN20-DN200, applicable medium: water, steam, oil etc. The socket pipe cap quality directly affects the operation of the pressure vessel. For the forming of tailor-welded before and after the split forming butterfly head welding tests, it is very important.

1,Before forming welding: ensure welding quality (surface testing, pay attention to the welding current, welding method, etc.), the best ray detection. Internal grinding with the base level before stamping. Ray detection after forming. 
2,After the split forming welding: guarantee welding quality (surface testing, pay attention to the welding current, welding method, etc.), radiographic testing. 

Butterfly head is widely used, so the welding head is quite important for butterfly, so at the time of welding head welding technique is very important.

Vessel heads

Vessel heads: DISHED PLATES, HEADS, TORISPHERICAL HEADS, CAPS.

End cap size data

Pipe Cap are used for connecting pipes of different diameters and find wide applications in various chemicals, construction industries, paper, cement & ship builders.

Pipe caps are widely well-known for the utmost output and outstanding results that it gives.

• Out diameter: 1/2″-60″ DN15-DN1500 
• 벽 두께: sch10-80s
• 압력: SCH5 to SCH160v
• Max. wall thickness: 200mm

외경		큰 사이즈		벽 두께는 'E'를 따릅니다.
DN	NPS	E	E1	E
15	1/2	25	25	3.73
20	3/4	25	25	3.91
25	1	38	38	4.55
32	11／4	38	38	4.85
40	11／2	38	38	5.08
50	2	38	44	5.54
65	21／2	38	51	7.01
80	3	51	64	7.62
90	31／2	64	76	8.08
100	4	64	76	8.56
125	5	76	89	9.53
150	6	89	102	10.97
200	8	102	127	12.7
250	10	127	152	12.7
300	12	152	178	12.7
350	14	165	191	12.7
400	16	178	203	12.7
450	18	203	229	12.7
500	20	229	254	12.7
550	22	254	254	12.7
600	24	267	305	12.7
650	26	267
700	28	267
750	30	267
800	32	267
850	34	267
900	36	267
950	38	305
1000	40	305
1050	42	305
1100	44	343
1150	46	343
1200	48	343

• Size range: 1/2 to 56 inches (DN15 to DN1400)
• Pressure: SCH5 to SCH160v
• Wall Thickness:sch10, sch20, sch30, std, sch40, sch60, xs, sch80, sch100, sch120, sch140, sch160, xxs, sch5s, sch20s, sch40s, sch80s
• 최대 벽 두께: 200mm

The weight of pipe cap 

公称通径 인치	公称通径 DN	外径 D	SCH5s 壁 厚	SCH10s 壁 厚	SCH10 壁 厚	SCH20 壁 厚	SCH30 壁 厚	SCH40s 壁 厚	STD 壁 厚	SCH40 壁 厚
1/8″	6	10.3	-	1.24				1.73	1.73	1.73
1/4″	8	13.7	-	1.65	-	-	-	2.24	2.24	2.24
3/8″	10	17.1	-	1.65	-	-	-	2.31	2.31	2.31
1/2″	15	21.3	1.65	2.11	-	-	-	2.77	2.77	2.77
3/4″	20	26.7	1.65	2.11	-	-	-	2.87	2.87	2.87
1″	25	33.4	1.65	2.77	-	-	-	3.38	3.38	3.38
11/4″	32	42.2	1.65	2.77	-	-	-	3.56	3.56	3.56
11/2″	40	48.3	1.65	2.77	-	-	-	3.68	3.68	3.68
2″	50	60.3	1.65	2.77	-	-	-	3.91	3.91	3.91
21/2″	65	73.0	2.11	3.05	-	-	-	5.16	5.16	5.16
3″	80	88.9	2.11	3.05	-	-	-	5.49	5.49	5.49
31/2″	90	101.6	2.11	3.05	-	-	-	5.74	5.74	5.74
4″	100	114.3	2.11	3.05	-	-	-	6.02	6.02	6.02
5″	125	141.3	2.77	3.40	-	-	-	6.55	6.55	6.55
6″	150	168.3	2.77	3.40	-	-	-	7.11	7.11	7.11
8″	200	219.1	2.77	3.76	-	6.35	7.04	8.18	8.18	8.18
10″	250	273.1	3.40	4.19	-	6.35	7.80	9.27	9.27	9.27
12″	300	323.9	3.96	4.57	-	6.35	8.83	9.53	9.53	10.31
14″	350	355.6	3.96	4.78	6.35	7.92	9.53	-	9.53	11.13
16″	400	406.4	4.19	4.78	6.35	7.92	9.53	-	9.53	12.70
18″	450	457.2	4.19	4.78	6.35	7.92	11.13	-	9.53	14.27
20″	500	508.0	4.78	5.54	6.35	9.53	12.70	-	9.53	15.09
22″	550	558.8	4.78	5.54	6.35	9.53	12.70	-	9.53
24″	600	609.6	5.54	6.35	6.35	9.53	14.27	-	9.53	17.48
26″	650	660.4	-	-	7.92	12.70	-	-	9.53	-
28″	700	711.2	-	-	7.92	12.70	15.88	-	9.53	-
30″	750	762.0	6.35	7.92	7.92	12.70	15.88	-	9.53	-
32″	800	812.8	-	-	7.92	12.70	15.88	-	9.53	17.48
34″	850	863.6	-	-	7.92	12.70	15.88	-	9.53	17.48
36″	900	914.4	-	-	7.92	12.70	15.88	-	9.53	19.05
38″	950	965.2	-	-	-	-	-	-	9.53	-
40″	1000	1016.0	-	-	-	-	-	-	9.53	-
42″	1050	1066.8	-	-	-	-	-	-	9.53	-
44″	1100	1117.6	-	-	-	-	-	-	9.53	-
46″	1150	1168.4	-	-	-	-	-	-	9.53	-
48″	1200	1219.2	-	-	-	-	-	-	9.53	-

What is the use of pipe cap?

I believe that when many people hear the word “파이프 캡s” for the first time will be tiny one leng. What is the pipe cap? What did it look like? What is the use? But for the mechanical workers this pipe cap is more common than the. In fact, the pipe cap is also called plug, head, pipe cap, bulkhead, the name of good let people understand. The pipe fittings are welded on the pipe end or are arranged on the outer thread of the pipe end to cover the pipe. Used to close the pipeline, the same role with the pipe blocking the same.
Blind in the form of a close, but the blind is blocked can be removed, and the welded pipe cap is not removable. The pipe cap includes the design of convex pipe cap, cone shell, reducer, flat cover and tight mouth.
The convex pipe cap includes a hemispherical, oval disc pipe cap, pipe cap and spherical pipe cap. From the stress angle convex pipe cap from the hemispherical pipe cap is not good, but from look on the manufacturing difficulty, has good manufacturing. And pipe cap from the use of classified material generally can be divided into several common copper pipe cap, iron pipe, stainless steel pipe cap, plastic pipe cap, pipe cap!
The pipe cap on the market are very much, because the industry is also very much, at present in many petrochemical, nuclear power, machinery, medical equipment, chemical fertilizer, shipbuilding, waterproofing treatment, pipe, water heating, solar water heaters and other industry need use to pipe cap!
pipe cap according to the classification of the pressure for about seventeen, and American Standard pipe pressure rating is the same, sch5s, sch10s, sch10, sch20, sch30, sch40s, STD, sch40, sch60, sch80s, XS; sch80, SCH100, sch120, sch140, sch160, XXS. The most commonly used is two kinds of STD and XS. pipe cap in the construction industry not very common, necessary pipe cap just in the end of the pipe for closed pipeline, and the blind plate uses basically the same is blind plate installed can be disassembled, but pipe cap can not disassembled, pipe cap is welded on the top of the pipe, and the blind plate in the form of very close to.
Above is the pipe cap of general use, actually a little attention point can see pipe cap can be divided into many types, so can not be generalized and pipe cap with the head on the literal meaning almost, in fact distinguish is not small: head for devices to a container under the (vertical) equipment part or left and right ends (horizontal) pipe cap are generally outside diameter, pipe caps can be screwed directly in the pipe, does not need other 파이프 피팅. So use pipe cap introduced today is here.

Delivery requirment:

• Marking: Yaang, material grade, standard, specification, heat no.
• Surface Treatment: Bright annealed, polished outside and inside surface.
• Package: knitting strip bundle, wooden box or steel box
• Mill test certificate: according to EN 10204 3.2
• Inspection: Third party inspection, or by clints

A pressing stereotype can be used for forming sheet metal into different shapes and the finished shape depends on the final position that the blanks are pushed down in. The metal used in pressing stereotype must be malleable as well as resistant to stress and tension damage.

From: www.yaang.com

출처: 중국 파이프 캡 제조업체 - 야앙 파이프 산업 유한회사(www.ugsteelmill.com)

(Yaang Pipe Industry is a leading manufacturer and supplier of nickel alloy and stainless steel products, including Super Duplex Stainless Steel Flanges, Stainless Steel Flanges, Stainless Steel Pipe Fittings, Stainless Steel Pipe. Yaang products are widely used in Shipbuilding, Nuclear power, Marine engineering, Petroleum, Chemical, Mining, Sewage treatment, Natural gas and Pressure vessels and other industries.)

이 기사에 대한 자세한 정보를 원하거나 의견을 공유하려면 다음 주소로 문의하세요. [email protected]

트위터에서 게시한 다른 기술 문서에도 관심이 있으실 수 있습니다:

  - 확장 조인트 선택 팁

  - 강관과 강관의 차이점은 무엇인가요?

  - 배관 시스템의 압력 테스트를 위한 엔지니어링 사양

  - 밸브 및 밸브 끝단 연결 유형을 선택하는 방법

  - 파이프 피팅을 테스트하는 방법은 무엇입니까?

  - 냉간 압연 강관 제조 공정

  - 고압 파이프 피팅의 개발 동향

  - 고품질 플랜지를 얻는 방법

  - 고품질 파이프 피팅을 얻는 방법

  - 고품질의 벨로우즈 익스팬션 조인트를 얻는 방법

  - 고품질 합금강 파이프를 얻는 방법

  - 고품질 강관을 얻는 방법

  - 래터럴 티와 트루 와이의 차이점은 무엇인가요?

  - 배출구 파이프 피팅이란?

  - 파이프 캡이란?

  - 안경 블라인드 플랜지 사용 시기

  - 고품질 보일러 튜브를 얻는 방법

참조:

• https://www.yaang.com/what-is-the-use-of-pipe-cap.html
• https://www.yaang.com/what-is-threaded-pipe-cap.html
• https://www.yaang.com/how-to-connect-pipeline-with-pipe-cap.html
• http://www.pipingstudy.com/cap.html