JIS G3459 Stainless steel pipes
JIS G3459 Stainless steel pipes.
1 Scope This Standard specifies the stainless steel pipes (hereafter referred to as “pipes”) used for the piping for corrosion resistance, low temperature service, high temperature service, etc.
Remarks 1 The purchaser may designate in addition to the items specified in this text, by prior agreement with the manufacturer, part or all of
the items in the special quality requirements specified in annex 1 (normative).
2 The International Standard corresponding to this Standard is as follows.
In addition, symbols which denote the degree of correspondence in the contents between the relevant International Standard and JIS are IDT (identical), MOD (modified), and NEQ (not equivalent) according to ISOPLEC Guide 21.
ISO 9330-6 : 1997
Welded steel tubes for pressure purposes-Technical delivery conditions-Part 6 : Longitudinally welded austenitic stainless steel tubes (MOD)
ISO 9329-4 1997
Seamless steel tubes for pressure purposes-Technical delivery conditions-Part 4 : Austenitic stainless steels (MOD)
2 Normative references The standards listed in attached table 1 contain provisions which, through reference in this Standard, constitute provisions of this Standard. If the indication of the year of publication is given to these referred standards, only the edition of the indicated year constitutes the provision of this Standard but the revision and amendment made thereafter do not apply. The normative references without the indication of the year of coming into effect apply only to the most recent edition (including amendments).
Research use only,Commercial use is prohibited.
If you want to use it ,you can buy from following link: