ASME B16.9 ASTM A403 WP316L Welded 45 Degree LR Elbow DN600 SCH10S

Type: 316L Welded 45 Degree LR Elbow
Material: 316L (UNS S31603/WNR. 1.4404)
Degree: 45 Degree
Size: 24″ (DN600)
Standard: ASME B16.9, THK: 6.35 MM
Ends: BW

Chemical Composition and Mechanical Property For 316L
Steel Grade	Chemical Composition									Mechanical Performance
	C(Max)	Si(Max)	Mn(Max)	P(Max)	S(Max)	Ni	Cr	Mo	N	Tensile Strength (Min）	Yield Strength (Min)
										Mpa	Mpa
316L	0.03	0.75	2.00	0.045	0.03	10.0–14.0	16.0–18.0	2.00–3.00	0.1	485	170

Table of Contents hide

Dimensions of Long Radius Elbows (R = 1,5 ND) ANSI B 16.9

Dimensional of tolerances – elbows

MARKING & PACKING

China 45 Degree Elbow Manufacturer www.ugsteelmill.com offers ASME B16.9 ASTM A403 WP316L Welded 45 Degree LR Elbow, DN600, SCH10S.

Physical Properties (Room Temperature)

Specific Heat (0-100°C)	500	J.kg-1.°K-1
Thermal Conductivity	16.3	W.m -1.°K-1
Thermal Expansion	15.9	μm/μm/°C
Modulus Elasticity	193	GPa
Electrical Resistivity	7.4	μohm/cm
Density	7.99	g/cm3

20200903003501 11621 - ASME B16.9 ASTM A403 WP316L Welded 45 Degree LR Elbow DN600 SCH10S

Dimensions of Long Radius Elbows (R = 1,5 ND) ANSI B 16.9

Inches	ND	MM	Center to center	Radius	Center to end	Back to face
D			O	A	B	K
1/2	15	21,34	76,20	38,10	15,87	47,62
3/4	20	26,67	57,15	28,57	11,11	42,86
1	25	33,40	76,20	38,10	22,22	55,56
1 1/4	32	42,16	95,25	47,60	25,40	69,85
1 1/2	40	48,26	114,30	57,15	28,57	82,55
2	50	60,32	152,40	76,20	34,92	106,40
2 1/2	65	73,02	190,50	95,25	44,45	131,80
3	80	88,90	228,60	114,30	50,80	158,75
3 1/2	90	101,60	266,70	133,35	57,15	184,15
4	100	114,30	304,80	152,40	63,50	209,55
5	125	141,30	381,00	190,50	79,38	261,90
6	150	168,27	457,20	228,60	95,25	312,70
8	200	219,07	609,60	304,80	127,00	414,30
10	250	273,05	762,00	381,00	158,75	517,50
12	300	323,85	914,40	457,20	190,50	619,10
14	350	355,60	1066,80	533,40	222,25	711,20
16	400	406,40	1219,20	609,60	254,00	812,80
18	450	457,20	1371,60	685,80	285,74	914,40
20	500	508,00	1524,00	762,00	317,50	1016,00
22	550	558,80	1676,40	838,20	342,90	1117,60
24	600	609,60	1828,80	914,40	381,00	1219,20
28	700	711,20	2133,60	1066,80	441,90	1422,40
Dimensions in mm.

20200903003831 97105 - ASME B16.9 ASTM A403 WP316L Welded 45 Degree LR Elbow DN600 SCH10S

Dimensional of tolerances – elbows

For all fittings				Elbows 90/45 deg	180° Returns
Nominal Pipe Size (NPS)	Outside Ø at Bevel	Inside Ø at End	Wall Thickness t / t1	Center to End Dim. A-B-C-M	Center to Center Dim. O	Back to Face Dim. K	Align-ment of Ends U
1/2 a 2 1/2	1	0,8	Not	2	7	7	1
3 a 3 1/2	1	1,6	less	2	7	7	1
4	+2 -1	1,6	than	2	7	7	1
5 a 6	+3 -1	1,6	87,50%	2	7	7	1
8	2	1,6	of nominal	2	7	7	1
10	+4 -3	3,2	tickness	2	7	7	2
12 a 18	+4-3	3,2		3	10	7	2
20 a 24	+6-5	4,8		3	10	7	2
26 a 30	+7 -5	4,8		3	…..	…..	…..
32 a 48	+7 -5	4,8		5	…..	…..	…..

Angularity Tolerances
ND	Max off angle	Max off plane
ND	Q	P
1/2 a 4	1	2
5 a 8	2	4
10 a 12	3	5
14 a 16	3	7
18 a 24	4	10
26 a 30	5	10
32 a 42	5	13
44 a 48	5	20

MARKING & PACKING

Our products like 45 degree long radius elbow are packaged to make sure that there’s no damage throughout transit. Just in case of exports, customary export packaging is completed in wooden boxes or cases. All 90 deg long radius elbow are marked with Trademark (Company’s LOGO), Grade, Size and Lot No. On requests we can do custom marking on our products.

<br>