Short Description

Model No.: Monel-400-SO-RF-Flange-5"-300#

China Slip On Flange Manufacturer www.ugsteelmill.com offers ASME B16.5 ASTM B564 Monel 400 SO RF Flange, 5″, 300#.

Request a quote Share

Key Specifications / Features

Type: Monel 400 SO RF Flange
Material: Monel 400 (UNS N04400)
Pressure: 300#
Size: DN150 (5″)
Standard: ASME B16.5
Ends: Raised Face

Monel Alloy 400 Pipe Flanges Chemical Composition

Grade C Mn Si S Cu Fe Ni
Monel 400 0.30 max 2.00 max 0.50 max 0.024 max 28.00 – 34.00 2.50 max 63.00 min

Monel 400 Plate Flanges Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Monel 400 8.8 g/cm3 1350 °C (2460 °F) Psi – 80,000 , MPa – 550 Psi – 35,000 , MPa – 240 40 %

Equivalent Grades for 400 Monel Industrial Pipe Flanges

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Monel 400 2.4360 N04400 NW 4400 NA 13 МНЖМц 28-2,5-1,5 NU-30M NiCu30Fe

2018103192541560824 - ASME B16.5 ASTM B564 Monel 400 SO RF Flange 5" 300#

ANSI, ASME, ASA, B16.5 300lb/sq.in. SLIP ON FLANGE RF / FF
ø D b g m J h k Holes l Kg.
1/2″ 95,6 14,3 34,9 38,1 22,3 22,2 66,7 4 15,9 0,700
3/4″ 117,5 15,9 42,9 47,6 27,7 25,4 82,5 4 19,0 1,100
1″ 123,8 17,5 50,8 54,0 34,5 27,0 88,9 4 19,0 1,400
1 1/4″ 133,3 19,0 63,5 63,5 43,2 27,0 98,4 4 19,0 1,800
1 1/2″ 155,6 20,6 73,0 69,8 49,5 30,2 114,3 4 22,2 2,600
2″ 165,1 22,2 92,1 84,1 62,0 33,3 127,0 8 19,0 3,400
2 1/2″ 190,5 25,4 104,8 100,0 74,7 38,1 149,2 8 22,2 4,400
3″ 209,5 28,6 127,0 117,5 90,7 42,9 168,3 8 22,2 6,100
3 1/2″ 228,6 30,2 139,7 133,3 103,4 44,4 184,1 8 22,2 7,500
4″ 254,0 31,7 157,2 146,0 116,1 47,6 200,0 8 22,2 10,100
5″ 279,4 34,9 185,7 177,8 143,8 50,8 234,9 8 22,2 12,500
6″ 317,5 36,5 215,9 206,4 170,7 52,4 269,9 12 22,2 14,100
8″ 381,0 41,3 269,9 260,3 221,5 61,9 330,2 12 25,4 24,800
10″ 444,5 47,6 323,8 320,7 276,3 66,7 387,3 16 28,6 37,100
12″ 520,7 50,8 381,0 374,6 327,1 73,0 450,8 16 31,7 50,000
14″ 584,2 54,0 412,7 425,4 359,1 76,2 514,3 20 31,7 70,000
16″ 647,7 57,1 469,9 482,6 410,5 82,5 571,5 20 34,9 90,000
18″ 711,2 60,3 533,4 533,4 461,8 88,9 628,6 24 34,9 112,000
20″ 774,7 63,5 584,2 584,2 513,1 95,2 685,8 24 34,9 133,000
22″ 838,2 66,7 641,2 641,2 564,4 101,6 742,9 24 41,3 197,000
24″ 914,4 69,8 692,1 701,7 615,9 106,4 812,8 24 41,3 208,000
NOTE:
1. Class 300 flanges except Lap Joint will be furnished with 0.06 (1.6mm) raised face, which is included in ‘Thickness’ (C) and ‘Length through Hub’ (Y1), (Y3).
2. For Slip-on, Threaded, Socket Welding and Lap Joint Flanges, the hubs can be shaped either vertical from base to top or tapered within the limits of 7 degrees.
3. Blind Flanges may be made with the same hub as that used for Slip-on Flanges or without hub.
4. The gasket surface and backside (bearing surface for bolting) are made parallel within 1 degree. To accomplish parallelism, spot facing is carried out according to MSS SP-9, without reducing thickness (C).
5. Depth of Socket (D) is covered by ANSI B 16.5 only in sizes through 3 inch, over 3 inch is at the manufacturer’s option.

Request a quote

Subject:

Products Related to ASME B16.5 ASTM B564 Monel 400 SO RF Flange 5″ 300#